Install on a managed Server, some Questions and Problems?!

Previous topic

Install & configuration

Next topic

Author	Message
Phil Brouwers	Thursday 04 September 2008 4:22:24 pm Hi, I am trying to install eZ Publish 4 on my managed Server (1&1 Germany). 1) Quest: What should I write to my php.ini "date.timezone = CET" or "date.timezone = Europe/Berlin"? 2) How can I find out if eZ Components are allready installed on my Server? 2a) If ezC are not installed (I think so), do I realy need to install ezC with PEAR or SVN? Or is it enough when I download ezC and upload them into the ezP directory like this "ezpublish4/ezc/"? 2b) Does ezP controll my ezC Installation during Setup? 2c) Does ezP run without any ezC (what are the negative results)? I tried to install ezP just for fun and noticed that if i choose "MySQLi" ez Publish said to me "Your MySQL Version 4.0.x is not good enough ;-)" but when I choose only "MySQL" there was no error. Is MySQL 4.1 STRONGLY Recommended? Thank you very much for your support. I just try to install my ez Publish very correct because I want to built an nice Website with it ;-) Pyrate
Piotrek Karaś	Friday 05 September 2008 1:38:58 am 1) Quest: What should I write to my php.ini "date.timezone = CET" or "date.timezone = Europe/Berlin"? Europe/Berlin should do it. 2) How can I find out if eZ Components are allready installed on my Server? Asking your supplier would be the easiest way. 2a) If ezC are not installed (I think so), do I realy need to install ezC with PEAR or SVN? Or is it enough when I download ezC and upload them into the ezP directory like this "ezpublish4/ezc/"? All the installation methods you mentioned are available, AFAIK. Here's some tips: http://ezcomponents.org/docs/install http://ez.ryba.eu/index.php/ez_components/ez_publish_using_ez_components_in_shared_hosting_environment 2b) Does ezP controll my ezC Installation during Setup? Nope. 2c) Does ezP run without any ezC (what are the negative results)? At present, eZC are required to add new extensions (regenerate autoload array). The dependency is probably expected to strengthen with upcoming releases. I tried to install ezP just for fun and noticed that if i choose "MySQLi" ez Publish said to me "Your MySQL Version 4.0.x is not good enough ;-)" but when I choose only "MySQL" there was no error. Is MySQL 4.1 STRONGLY Recommended? It is REQUIRED: http://ez.no/ezpublish/requirements MySQL 4.0.x and lower did not support unicode (among other things). MySQL 4.1 and up is a must. -- Company: mediaSELF Sp. z o.o., http://www.mediaself.pl eZ references: http://ez.no/partners/worldwide_partners/mediaself eZ certified developer: http://ez.no/certification/verify/272585 eZ blog: http://ez.ryba.eu
Phil Brouwers	Friday 05 September 2008 2:13:11 am Thank you! But there are still some things I have to ask you ;-) 2.1) How can I test my ezC installation (PEAR Installation)? Is there any testezcomponents.php? -> How can I test if ezPublish recognizes ezComponents correctly? 2.2) My Host is not very fast with his answers, so I want to find out by myself: phpinfo() -> does not tell me anything about ezC, doesnt it? Or is there another way to look after ezC? Thank you!

Author

Message

Phil Brouwers

Thursday 04 September 2008 4:22:24 pm

Hi,

I am trying to install eZ Publish 4 on my managed Server (1&1 Germany).

1) Quest: What should I write to my php.ini "date.timezone = CET" or "date.timezone = Europe/Berlin"?
2) How can I find out if eZ Components are allready installed on my Server?
2a) If ezC are not installed (I think so), do I realy need to install ezC with PEAR or SVN? Or is it enough when I download ezC and upload them into the ezP directory like this "ezpublish4/ezc/"?
2b) Does ezP controll my ezC Installation during Setup?
2c) Does ezP run without any ezC (what are the negative results)?

I tried to install ezP just for fun and noticed that if i choose "MySQLi" ez Publish said to me "Your MySQL Version 4.0.x is not good enough ;-)" but when I choose only "MySQL" there was no error. Is MySQL 4.1 STRONGLY Recommended?

Thank you very much for your support. I just try to install my ez Publish very correct because I want to built an nice Website with it ;-)

Pyrate

Piotrek Karaś

Friday 05 September 2008 1:38:58 am

1) Quest: What should I write to my php.ini "date.timezone = CET" or "date.timezone = Europe/Berlin"?

Europe/Berlin should do it.

2) How can I find out if eZ Components are allready installed on my Server?

Asking your supplier would be the easiest way.

2a) If ezC are not installed (I think so), do I realy need to install ezC with PEAR or SVN? Or is it enough when I download ezC and upload them into the ezP directory like this "ezpublish4/ezc/"?

All the installation methods you mentioned are available, AFAIK. Here's some tips:
http://ezcomponents.org/docs/install
http://ez.ryba.eu/index.php/ez_components/ez_publish_using_ez_components_in_shared_hosting_environment

2b) Does ezP controll my ezC Installation during Setup?

Nope.

2c) Does ezP run without any ezC (what are the negative results)?

At present, eZC are required to add new extensions (regenerate autoload array). The dependency is probably expected to strengthen with upcoming releases.

I tried to install ezP just for fun and noticed that if i choose "MySQLi" ez Publish said to me "Your MySQL Version 4.0.x is not good enough ;-)" but when I choose only "MySQL" there was no error. Is MySQL 4.1 STRONGLY Recommended?

It is REQUIRED:
http://ez.no/ezpublish/requirements
MySQL 4.0.x and lower did not support unicode (among other things). MySQL 4.1 and up is a must.

--
Company: mediaSELF Sp. z o.o., http://www.mediaself.pl
eZ references: http://ez.no/partners/worldwide_partners/mediaself
eZ certified developer: http://ez.no/certification/verify/272585
eZ blog: http://ez.ryba.eu

Phil Brouwers

Friday 05 September 2008 2:13:11 am

Thank you!

But there are still some things I have to ask you ;-)

2.1) How can I test my ezC installation (PEAR Installation)? Is there any testezcomponents.php?
-> How can I test if ezPublish recognizes ezComponents correctly?

2.2) My Host is not very fast with his answers, so I want to find out by myself: phpinfo() -> does not tell me anything about ezC, doesnt it? Or is there another way to look after ezC?

Thank you!

eZ debug

Timing:	Jan 31 2025 03:43:58
Script start
Timing:	Jan 31 2025 03:43:58
Module start 'layout'
Timing:	Jan 31 2025 03:43:58
Module start 'content'
Timing:	Jan 31 2025 03:43:58
Module end 'content'
Timing:	Jan 31 2025 03:43:58
Script end

Main resources:

Total runtime	0.0224 sec
Peak memory usage	8,192.0000 KB
Database Queries	3

Timing points:

Checkpoint	Start (sec)	Duration (sec)	Memory at start (KB)	Memory used (KB)
Script start	0.0000	0.0054	588.4141	151.2422
Module start 'layout'	0.0054	0.0040	739.6563	220.7344
Module start 'content'	0.0093	0.0116	960.3906	1,002.0234
Module end 'content'	0.0209	0.0015	1,962.4141	33.9922
Script end	0.0223		1,996.4063

Time accumulators:

Accumulator	Duration (sec)	Duration (%)	Count	Average (sec)
Ini load
Load cache	0.0028	12.3461	14	0.0002
Check MTime	0.0010	4.5415	14	0.0001
Mysql Total
Database connection	0.0006	2.4801	1	0.0006
Mysqli_queries	0.0023	10.3709	3	0.0008
Looping result	0.0000	0.0629	1	0.0000
Template Total	0.0011	4.8	1	0.0011
Template load	0.0008	3.3963	1	0.0008
Template processing	0.0003	1.4073	1	0.0003
Override
Cache load	0.0005	2.2915	1	0.0005
General
dbfile	0.0014	6.1672	8	0.0002
String conversion	0.0000	0.0437	4	0.0000
Note: percentages do not add up to 100% because some accumulators overlap

Templates used to render the page:

Usage	Requested template	Template	Template loaded	Edit	Override
1	print_pagelayout.tpl	<No override>	extension/community/design/community/templates/print_pagelayout.tpl
Number of times templates used: 1 Number of unique templates used: 1

Time used to render debug report: 0.0001 secs