php safe mode and .htaccess

Next topic

Author	Message
paul bolger	Saturday 12 August 2006 11:17:43 pm I'm trying to set up EzPublish on a remote Linux host. The host has PHP safe mode set to 'on', and I'm trying to override that with a line in .htaccess in the root directory. My question is: How do I tell if the override is working? The installer, and phpinfo, are maintaining that safe mode is still on. Can I ignore that warning? Paul Bolger
Łukasz Serwatka	Sunday 13 August 2006 11:20:00 pm Hi Paul safe_mode can be set in php.ini or httpd.conf. It will not work with .htaccess. This means that you need full access to your web server environment. You can ask also system administrator for help. Personal website -> http://serwatka.net Blog (about eZ Publish) -> http://serwatka.net/blog
paul bolger	Monday 14 August 2006 5:32:43 am Hi Lukasz Ok, if I have to ask my hosting provider to turn of safe mode for my site, is there anything else I need to ask for at the same time? I'm a bit unclear whether the other problems mentioned in the finetune dialogue (wrong permissions for a couple of directories under /var, and inability to create or write to /tmp) would still be issues if safe mode was switched off. BTW: do you know which files need to be deleted or replaced to take EzPublish back to the beginning of the automated installation? I've got to a point where I have a non-functioning installation and it'd be nice be able to undo it without deleting the lot and re-starting. regards Paul Bolger Paul Bolger
Łukasz Serwatka	Monday 14 August 2006 5:47:34 am Hi again, I'm a bit unclear whether the other problems mentioned in the finetune dialogue (wrong permissions for a couple of directories under /var, and inability to create or write to /tmp) would still be issues if safe mode was switched off. Web server needs write permissions to the eZ publish var/ directory. It is directory where are stored images, cache files, logs, etc. You will need also permissions to upload files (images, documents, etc) via HTTP. Disable safe_mode should help. Ask administrator about this. BTW: do you know which files need to be deleted or replaced to take EzPublish back to the beginning of the automated installation? I've got to a point where I have a non-functioning installation and it'd be nice be able to undo it without deleting the lot and re-starting. Remove all files from the settings/override/ also directories from settings/siteaccess/ which where created by you or your installation wizard (keep only admin and setup, that 2 comes with default distro). Personal website -> http://serwatka.net Blog (about eZ Publish) -> http://serwatka.net/blog
paul bolger	Tuesday 15 August 2006 2:16:42 am Hi Lukasz I asked my hosting company to turn off safe mode for my domain, and they... added a line to the .htaccess file in the root directory. Can you explain why this doesn't work for EzPublish while it (apparently) does for other PHP apps? I'm not trying to be smart, I just need to be able to justify myself if I go back to them with a special request. Paul Bolger Paul Bolger
Łukasz Serwatka	Tuesday 15 August 2006 2:22:28 am Can you please provide link to the phpinfo and check what line was add to your .htaccess? Create new file info.php with code inside: <?php phpinfo(); ?> Then run it in your web browser. Check safe_mode for local and global setting. Personal website -> http://serwatka.net Blog (about eZ Publish) -> http://serwatka.net/blog
paul bolger	Tuesday 15 August 2006 4:46:32 pm Hi Lukasz I tried running php.info again and guess what: 'safe mode = off" So it seems that adding php_admin_flag safe_mode Off (this is what the host helpdesk said they added) to .htaccess has fixed the problem, although I'm a little confused as to where it's been added as I can't see it in any of the directories visible to me. Anyhow, to clarify for anyone else reading, .htaccess overriding of php safe mode will display in php.info - if it's showing as 'safe mode = on' you need to try something else. Thanks for your patience. Paul Bolger Paul Bolger
Łukasz Serwatka	Tuesday 15 August 2006 11:11:41 pm I think they set this flag in the httpd.conf. That setting can be only change in the php.ini or in httpd.conf. If user could disable safe_mode via .htaccess then whole idea of safe_mode obviously does not make sens. More about safe_mode http://no.php.net/manual/en/features.safe-mode.php#ini.sect.safe-mode Personal website -> http://serwatka.net Blog (about eZ Publish) -> http://serwatka.net/blog

eZ debug

Timing:	Jan 18 2025 02:59:56
Script start
Timing:	Jan 18 2025 02:59:56
Module start 'layout'
Timing:	Jan 18 2025 02:59:56
Module start 'content'
Timing:	Jan 18 2025 02:59:57
Module end 'content'
Timing:	Jan 18 2025 02:59:57
Script end

Main resources:

Total runtime	0.6290 sec
Peak memory usage	4,096.0000 KB
Database Queries	72

Timing points:

Checkpoint	Start (sec)	Duration (sec)	Memory at start (KB)	Memory used (KB)
Script start	0.0000	0.0043	589.4609	152.6406
Module start 'layout'	0.0043	0.0027	742.1016	39.4766
Module start 'content'	0.0070	0.6202	781.5781	615.1094
Module end 'content'	0.6272	0.0017	1,396.6875	20.1641
Script end	0.6289		1,416.8516

Time accumulators:

Accumulator	Duration (sec)	Duration (%)	Count	Average (sec)
Ini load
Load cache	0.0032	0.5031	16	0.0002
Check MTime	0.0013	0.2081	16	0.0001
Mysql Total
Database connection	0.0006	0.0876	1	0.0006
Mysqli_queries	0.5523	87.8005	72	0.0077
Looping result	0.0008	0.1227	70	0.0000
Template Total	0.5992	95.3	2	0.2996
Template load	0.0022	0.3508	2	0.0011
Template processing	0.5970	94.9056	2	0.2985
Template load and register function	0.0001	0.0161	1	0.0001
states
state_id_array	0.0009	0.1447	1	0.0009
state_identifier_array	0.0011	0.1712	2	0.0005
Override
Cache load	0.0020	0.3121	51	0.0000
Sytem overhead
Fetch class attribute can translate value	0.0010	0.1580	2	0.0005
Fetch class attribute name	0.0014	0.2198	10	0.0001
XML
Image XML parsing	0.0010	0.1669	2	0.0005
class_abstraction
Instantiating content class attribute	0.0000	0.0056	16	0.0000
General
dbfile	0.0017	0.2623	24	0.0001
String conversion	0.0000	0.0006	4	0.0000
Note: percentages do not add up to 100% because some accumulators overlap

Templates used to render the page:

Usage	Requested template	Template	Template loaded
1	node/view/full.tpl	full/forum_topic.tpl	extension/sevenx/design/simple/override/templates/full/forum_topic.tpl
8	content/datatype/view/ezimage.tpl	<No override>	extension/sevenx/design/simple/templates/content/datatype/view/ezimage.tpl
8	content/datatype/view/ezxmltext.tpl	<No override>	extension/community_design/design/suncana/templates/content/datatype/view/ezxmltext.tpl
5	content/datatype/view/ezxmltags/line.tpl	<No override>	design/standard/templates/content/datatype/view/ezxmltags/line.tpl
15	content/datatype/view/ezxmltags/paragraph.tpl	<No override>	extension/ezwebin/design/ezwebin/templates/content/datatype/view/ezxmltags/paragraph.tpl
3	content/datatype/view/ezxmltags/literal.tpl	<No override>	extension/community/design/standard/templates/content/datatype/view/ezxmltags/literal.tpl
1	print_pagelayout.tpl	<No override>	extension/community/design/community/templates/print_pagelayout.tpl
Number of times templates used: 41 Number of unique templates used: 7

Time used to render debug report: 0.0001 secs