trying to contain rage

Next topic

Author	Message
sean ross	Friday 31 October 2003 8:42:05 pm i've installed a lot of php apps but can not get this thing working. One issue, and install doc and that's it, no instructions for basic usage. The instructions if there are any can't be found on your site. I have found some instructions but they are extremely brief and vague. ALL I want is to know how to get started? Namely where in god's name is the admin page??? I've tried my ezportal path /admin and get a blank page. is that even supposed to be where it is? How can there not be a newbie usersguide? I mean really, "how to get started" -after install go to the admin url which is url blah blah and begin configuring your new site. I've wasted half a day on this, can anyone help me before I go insane?
Dimitri Easy	Saturday 01 November 2003 1:34:59 am chekout here for starter: http://ez.no/developer/ez_publish_3/documentation/installation like me yetserday you will probably want the NORMAL install, but.. to add to this before you run the wizard make sure you set permissions on 3 folders recursively: var/* (recursive) settings/* (recursive) design/* (recursive) I set them to 777 using CHMOD (should be a function on your FTP program) and all files under these directories. then - make sure your MySQL database is ready (that its there ready to use and have your Servername (usually 'localhost' or the name of your DB) Username and password. Now you can begin assuming you have transfered all the files and folders to your public_html (whatever your root area is) folder or one under this. now refer to this document: http://ez.no/developer/ez_publish_3/documentation/installation/the_setup_wizard once finished entering the info, the wizard will give you the 'user' and 'admin' links to use and the username and passowrd to access the admin area to get started.... I have some small probs to get through, but nothing I havent found in other similar systems... NOTE: to re-start the wizard again - I had to delete the 'settings' folder on the server and re-transfer these files and folder back over - then the wizard started up again ....viola ! Dimitri (I did get anoyed at one point - but the rule is keep the defaults until it works and then try the customisations such as working on your Apache config or php.ini - always backup as well :)

Author

Message

Friday 31 October 2003 8:42:05 pm

i've installed a lot of php apps but can not get this thing working. One issue, and install doc and that's it, no instructions for basic usage. The instructions if there are any can't be found on your site. I have found some instructions but they are extremely brief and vague. ALL I want is to know how to get started? Namely where in god's name is the admin page??? I've tried my ezportal path /admin and get a blank page. is that even supposed to be where it is? How can there not be a newbie usersguide? I mean really, "how to get started" -after install go to the admin url which is url blah blah and begin configuring your new site. I've wasted half a day on this, can anyone help me before I go insane?

Dimitri Easy

Saturday 01 November 2003 1:34:59 am

chekout here for starter:
http://ez.no/developer/ez_publish_3/documentation/installation
like me yetserday you will probably want the NORMAL install, but..
to add to this before you run the wizard make sure you set permissions on 3 folders recursively:

var/* (recursive)
settings/* (recursive)
design/* (recursive)

I set them to 777 using CHMOD (should be a function on your FTP program) and all files under these directories.

then - make sure your MySQL database is ready (that its there ready to use and have your Servername (usually 'localhost' or the name of your DB) Username and password.

Now you can begin assuming you have transfered all the files and folders to your public_html (whatever your root area is) folder or one under this.

now refer to this document:

http://ez.no/developer/ez_publish_3/documentation/installation/the_setup_wizard

once finished entering the info, the wizard will give you the 'user' and 'admin' links to use and the username and passowrd to access the admin area to get started....

I have some small probs to get through, but nothing I havent found in other similar systems...

NOTE: to re-start the wizard again - I had to delete the 'settings' folder on the server and re-transfer these files and folder back over - then the wizard started up again ....viola !

Dimitri (I did get anoyed at one point - but the rule is keep the defaults until it works and then try the customisations such as working on your Apache config or php.ini - always backup as well :)

eZ debug

Timing:	Jan 31 2025 08:19:30
Script start
Timing:	Jan 31 2025 08:19:30
Module start 'layout'
Timing:	Jan 31 2025 08:19:30
Module start 'content'
Timing:	Jan 31 2025 08:19:31
Module end 'content'
Timing:	Jan 31 2025 08:19:31
Script end

Main resources:

Total runtime	0.8301 sec
Peak memory usage	4,096.0000 KB
Database Queries	54

Timing points:

Checkpoint	Start (sec)	Duration (sec)	Memory at start (KB)	Memory used (KB)
Script start	0.0000	0.0044	588.1328	151.2109
Module start 'layout'	0.0044	0.0023	739.3438	36.6641
Module start 'content'	0.0067	0.8225	776.0078	884.7813
Module end 'content'	0.8292	0.0009	1,660.7891	8.0156
Script end	0.8301		1,668.8047

Time accumulators:

Accumulator	Duration (sec)	Duration (%)	Count	Average (sec)
Ini load
Load cache	0.0028	0.3428	16	0.0002
Check MTime	0.0012	0.1474	16	0.0001
Mysql Total
Database connection	0.0007	0.0804	1	0.0007
Mysqli_queries	0.7910	95.2830	54	0.0146
Looping result	0.0004	0.0467	52	0.0000
Template Total	0.8016	96.6	2	0.4008
Template load	0.0020	0.2423	2	0.0010
Template processing	0.7996	96.3221	2	0.3998
Template load and register function	0.0011	0.1284	1	0.0011
states
state_id_array	0.0009	0.1080	1	0.0009
state_identifier_array	0.0009	0.1079	2	0.0004
Override
Cache load	0.0016	0.1960	21	0.0001
Sytem overhead
Fetch class attribute can translate value	0.0004	0.0501	2	0.0002
Fetch class attribute name	0.0015	0.1753	2	0.0007
XML
Image XML parsing	0.0002	0.0248	2	0.0001
class_abstraction
Instantiating content class attribute	0.0000	0.0006	2	0.0000
General
dbfile	0.0016	0.1937	10	0.0002
String conversion	0.0000	0.0007	4	0.0000
Note: percentages do not add up to 100% because some accumulators overlap

Templates used to render the page:

Usage	Requested template	Template	Template loaded
1	node/view/full.tpl	full/forum_topic.tpl	extension/sevenx/design/simple/override/templates/full/forum_topic.tpl
2	content/datatype/view/ezxmltext.tpl	<No override>	extension/community_design/design/suncana/templates/content/datatype/view/ezxmltext.tpl
3	content/datatype/view/ezxmltags/paragraph.tpl	<No override>	extension/ezwebin/design/ezwebin/templates/content/datatype/view/ezxmltags/paragraph.tpl
2	content/datatype/view/ezxmltags/line.tpl	<No override>	design/standard/templates/content/datatype/view/ezxmltags/line.tpl
1	print_pagelayout.tpl	<No override>	extension/community/design/community/templates/print_pagelayout.tpl
Number of times templates used: 9 Number of unique templates used: 5

Time used to render debug report: 0.0001 secs