Uploaded file is not an eZ publish package

Next topic

Author	Message
Matt Cole	Wednesday 02 August 2006 7:04:42 am When installing 3.8.3, at the "Site Selection" page of the wizard, I selected "Plain Site" and click "Next" and get "Invalid package" error. So I downloaded the "Plain Site" .ezpkg file from http://packages.ez.no/ezpublish/3.8/, browsed to it on my filesystem and selected "Upload" and received "Uploaded file is not an eZ publish package". I tried the suggestions on similar posts with no luck. My var/, var/storage/ and var/storage/packages/ directories are all owned by the webserver user and are chmod 775. Red Hat Enterprise ES 3 Apache 2.0.46 PHP 4.4.2 MySQL 4.0.20 ImageMagick 6.2.8 I did choose to ignore the "AcceptPathInfo On" error earlier as I have that set already in my Apache config and saw a post from an ezSystems staffer saying that was sometimes incorrectely reporting an error. I can't get past this. Any suggestions are appreciated. Best Regards.
Matt Cole	Wednesday 02 August 2006 9:59:16 am Solved. zlib wasn't compiled into PHP. Recompiled PHP --with-zlib and it worked. ---
Kristof Coomans	Thursday 03 August 2006 9:30:27 am Hello Matt, and welcome to the eZ community. The setup wizard performs some tests, but currently the test on the zlib extension is optional so you can proceed without it. Since eZ publish 3.8 however, zlib is required since you always need to unpack a package. Without a package, you can't finish the setup wizard. I've posted an enhancement request for this: http://ez.no/community/bugs/installation_wizard_test_for_zlib_should_be_critical_not_optional Cheers! independent eZ Publish developer and service provider \| http://blog.coomanskristof.be \| http://ezpedia.org

Author

Message

Wednesday 02 August 2006 7:04:42 am

When installing 3.8.3, at the "Site Selection" page of the wizard, I selected "Plain Site" and click "Next" and get "Invalid package" error. So I downloaded the "Plain Site" .ezpkg file from http://packages.ez.no/ezpublish/3.8/, browsed to it on my filesystem and selected "Upload" and received "Uploaded file is not an eZ publish package".

I tried the suggestions on similar posts with no luck.

My var/, var/storage/ and var/storage/packages/ directories are all owned by the webserver user and are chmod 775.

Red Hat Enterprise ES 3
Apache 2.0.46
PHP 4.4.2
MySQL 4.0.20
ImageMagick 6.2.8

I did choose to ignore the "AcceptPathInfo On" error earlier as I have that set already in my Apache config and saw a post from an ezSystems staffer saying that was sometimes incorrectely reporting an error.

I can't get past this. Any suggestions are appreciated.

Best Regards.

Matt Cole

Wednesday 02 August 2006 9:59:16 am

Solved.

zlib wasn't compiled into PHP.

Recompiled PHP --with-zlib and it worked.

---

Kristof Coomans

Thursday 03 August 2006 9:30:27 am

Hello Matt, and welcome to the eZ community.

The setup wizard performs some tests, but currently the test on the zlib extension is optional so you can proceed without it. Since eZ publish 3.8 however, zlib is required since you always need to unpack a package. Without a package, you can't finish the setup wizard.

I've posted an enhancement request for this: http://ez.no/community/bugs/installation_wizard_test_for_zlib_should_be_critical_not_optional

Cheers!

independent eZ Publish developer and service provider | http://blog.coomanskristof.be | http://ezpedia.org

eZ debug

Timing:	Jan 20 2025 06:36:00
Script start
Timing:	Jan 20 2025 06:36:00
Module start 'layout'
Timing:	Jan 20 2025 06:36:00
Module start 'content'
Timing:	Jan 20 2025 06:36:00
Module end 'content'
Timing:	Jan 20 2025 06:36:00
Script end

Main resources:

Total runtime	0.6010 sec
Peak memory usage	4,096.0000 KB
Database Queries	57

Timing points:

Checkpoint	Start (sec)	Duration (sec)	Memory at start (KB)	Memory used (KB)
Script start	0.0000	0.0060	589.4063	152.6563
Module start 'layout'	0.0060	0.0052	742.0625	39.4922
Module start 'content'	0.0112	0.5883	781.5547	532.7813
Module end 'content'	0.5994	0.0015	1,314.3359	12.1250
Script end	0.6009		1,326.4609

Time accumulators:

Accumulator	Duration (sec)	Duration (%)	Count	Average (sec)
Ini load
Load cache	0.0036	0.5982	16	0.0002
Check MTime	0.0015	0.2507	16	0.0001
Mysql Total
Database connection	0.0011	0.1899	1	0.0011
Mysqli_queries	0.5410	90.0169	57	0.0095
Looping result	0.0006	0.0991	55	0.0000
Template Total	0.5627	93.6	2	0.2813
Template load	0.0023	0.3837	2	0.0012
Template processing	0.5603	93.2377	2	0.2802
Template load and register function	0.0003	0.0542	1	0.0003
states
state_id_array	0.0009	0.1459	1	0.0009
state_identifier_array	0.0009	0.1493	2	0.0004
Override
Cache load	0.0019	0.3107	25	0.0001
Sytem overhead
Fetch class attribute can translate value	0.0005	0.0864	2	0.0003
Fetch class attribute name	0.0013	0.2132	4	0.0003
XML
Image XML parsing	0.0006	0.0995	2	0.0003
class_abstraction
Instantiating content class attribute	0.0000	0.0013	4	0.0000
General
dbfile	0.0010	0.1588	16	0.0001
String conversion	0.0000	0.0023	4	0.0000
Note: percentages do not add up to 100% because some accumulators overlap

Templates used to render the page:

Usage	Requested template	Template	Template loaded
1	node/view/full.tpl	full/forum_topic.tpl	extension/sevenx/design/simple/override/templates/full/forum_topic.tpl
3	content/datatype/view/ezxmltext.tpl	<No override>	extension/community_design/design/suncana/templates/content/datatype/view/ezxmltext.tpl
4	content/datatype/view/ezxmltags/paragraph.tpl	<No override>	extension/ezwebin/design/ezwebin/templates/content/datatype/view/ezxmltags/paragraph.tpl
1	content/datatype/view/ezxmltags/line.tpl	<No override>	design/standard/templates/content/datatype/view/ezxmltags/line.tpl
1	content/datatype/view/ezimage.tpl	<No override>	extension/sevenx/design/simple/templates/content/datatype/view/ezimage.tpl
1	print_pagelayout.tpl	<No override>	extension/community/design/community/templates/print_pagelayout.tpl
Number of times templates used: 11 Number of unique templates used: 6

Time used to render debug report: 0.0001 secs