|
Author
|
Message
|
|
Claus Jensen
|
Wednesday 26 February 2003 7:09:35 am
After reading the previous message I finally got into my site, after having struggled for hours to find out why I got this "Access Denied
- You don't have permission to access this area"
It was one little setting in the site.ini file:
[SiteAccessSettings]
CheckValidity=true #instead of false
And the explanation given about this setting is:
#Set to true if you want the setup system to be activated How was I to know that the "Access Denied" message was all about this?!?!? Mildly frustrating.. And I couldn't find anything in the sdk or manuals about this setup system...well got to go and find out what this setup system is...
regards,
claÜs
|
|
Mike Cohen
|
Wednesday 26 February 2003 2:44:13 pm
> After reading the previous message I finally got into my
> site, after having struggled for hours to find out why I got
> this "Access Denied
> - You don't have permission to access this area"
>
> It was one little setting in the site.ini file:
> [SiteAccessSettings]
> CheckValidity=true #instead of false
>
> And the explanation given about this setting is:
> #Set to true if you want the setup system to be activated
>
> How was I to know that the "Access Denied" message was all
> about this?!?!? Mildly frustrating.. And I couldn't find
> anything in the sdk or manuals about this setup
> system...well got to go and find out what this setup system
> is...
>
> regards,
> claÜs I am having the same problem, and can't figure out why. When I change the value you mentioned to true, I get a Set Up Utility Screen. Is that what you get as well? Mike
|
|
Claus Jensen
|
Thursday 27 February 2003 1:34:40 am
> I am having the same problem, and can't figure out why. When
> I change the value you mentioned to true, I get a Set Up
> Utility Screen. Is that what you get as well? Yes, and I just thought I had solved the problem, but noooooo still the same message "Access denied....... " Do you still get that same message too, after you have done the configuring?
|
|
Volker Lenz
|
Thursday 27 February 2003 2:01:25 am
> > I am having the same problem, and can't figure out why.
> When
> > I change the value you mentioned to true, I get a Set Up
> > Utility Screen. Is that what you get as well?
>
> Yes, and I just thought I had solved the problem, but
> noooooo still the same message "Access denied....... "
>
> Do you still get that same message too, after you have done
> the configuring? This one may help you: http://developer.ez.no/forum/message/14973
|
|
Mike Cohen
|
Thursday 27 February 2003 9:05:48 am
> > I am having the same problem, and can't figure out why.
> When
> > I change the value you mentioned to true, I get a Set Up
> > Utility Screen. Is that what you get as well?
>
> Yes, and I just thought I had solved the problem, but
> noooooo still the same message "Access denied....... "
>
> Do you still get that same message too, after you have done
> the configuring?
Read the article Volker mentions in his post, and the one mentioned in that post. I created the following Role for my Anonymous user:
user login *
and it solved the problem. Hope you get it solved, Mike
|
|
Claus Jensen
|
Friday 28 February 2003 12:22:47 am
> Read the article Volker mentions in his post, and the one
> mentioned in that post. I created the following Role for my
> Anonymous user:
> user login *
> and it solved the problem.
>
> Hope you get it solved, Thanks for all help. I must have messed up some file permissions or config files, I re-installed all of it and started at scratch, so now it's working:)
The trick that got me of track in the start was the setting:
[SiteAccessSettings]
CheckValididy=true I couldn't find documentation on this, and there is nothing in the sdk about it. The role thing mentioned in your message, is set to that in my "role view" by default, so its no issue for me. Strange if you are using the RC2 as well?!
Regards,
claÜs
|
|
Claus Jensen
|
Monday 10 March 2003 5:21:33 am
> > > I am having the same problem, and can't figure out
> why.
> > When
> > > I change the value you mentioned to true, I get a Set
> Up
> > > Utility Screen. Is that what you get as well?
> >
> > Yes, and I just thought I had solved the problem, but
> > noooooo still the same message "Access denied....... "
> >
> > Do you still get that same message too, after you have
> done
> > the configuring?
>
> This one may help you:
>
> http://developer.ez.no/forum/message/14973 I ended up re-installing ez, that solved my problems. Must have been something with som filepermissions.
thanks for the help people,
claÜs
|
|
Claus Jensen
|
Monday 10 March 2003 5:21:33 am
> > > I am having the same problem, and can't figure out
> why.
> > When
> > > I change the value you mentioned to true, I get a Set
> Up
> > > Utility Screen. Is that what you get as well?
> >
> > Yes, and I just thought I had solved the problem, but
> > noooooo still the same message "Access denied....... "
> >
> > Do you still get that same message too, after you have
> done
> > the configuring?
>
> This one may help you:
>
> http://developer.ez.no/forum/message/14973 I ended up re-installing ez, that solved my problems. Must have been something with som filepermissions.
thanks for the help people,
claÜs
|
|
Claus Jensen
|
Monday 10 March 2003 5:21:33 am
> > > I am having the same problem, and can't figure out
> why.
> > When
> > > I change the value you mentioned to true, I get a Set
> Up
> > > Utility Screen. Is that what you get as well?
> >
> > Yes, and I just thought I had solved the problem, but
> > noooooo still the same message "Access denied....... "
> >
> > Do you still get that same message too, after you have
> done
> > the configuring?
>
> This one may help you:
>
> http://developer.ez.no/forum/message/14973 I ended up re-installing ez, that solved my problems. Must have been something with som filepermissions.
thanks for the help people,
claÜs
|
|
Claus Jensen
|
Monday 10 March 2003 5:21:33 am
> > > I am having the same problem, and can't figure out
> why.
> > When
> > > I change the value you mentioned to true, I get a Set
> Up
> > > Utility Screen. Is that what you get as well?
> >
> > Yes, and I just thought I had solved the problem, but
> > noooooo still the same message "Access denied....... "
> >
> > Do you still get that same message too, after you have
> done
> > the configuring?
>
> This one may help you:
>
> http://developer.ez.no/forum/message/14973 I ended up re-installing ez, that solved my problems. Must have been something with som filepermissions.
thanks for the help people,
claÜs
|
|
Claus Jensen
|
Monday 10 March 2003 5:21:33 am
> > > I am having the same problem, and can't figure out
> why.
> > When
> > > I change the value you mentioned to true, I get a Set
> Up
> > > Utility Screen. Is that what you get as well?
> >
> > Yes, and I just thought I had solved the problem, but
> > noooooo still the same message "Access denied....... "
> >
> > Do you still get that same message too, after you have
> done
> > the configuring?
>
> This one may help you:
>
> http://developer.ez.no/forum/message/14973 I ended up re-installing ez, that solved my problems. Must have been something with som filepermissions.
thanks for the help people,
claÜs
|
|
Claus Jensen
|
Monday 10 March 2003 5:21:33 am
> > > I am having the same problem, and can't figure out
> why.
> > When
> > > I change the value you mentioned to true, I get a Set
> Up
> > > Utility Screen. Is that what you get as well?
> >
> > Yes, and I just thought I had solved the problem, but
> > noooooo still the same message "Access denied....... "
> >
> > Do you still get that same message too, after you have
> done
> > the configuring?
>
> This one may help you:
>
> http://developer.ez.no/forum/message/14973 I ended up re-installing ez, that solved my problems. Must have been something with som filepermissions.
thanks for the help people,
claÜs
|
