|
Author
|
Message
|
|
Siw Helen Thorslund
|
Thursday 18 November 2004 9:17:59 am
My installation of eZ started running verry slow while working on it today. It seems like it runs in a memory-loop or something, cause the pages just time out...
What could have happened?
What can I do to get this back to normal?
I hope somenone can help me with my problem verry soon, cause I have a verry short deadline on this.
Please help! Thanx.. =)
www.VZT.no ( http://www.VZT.no )
VZT References ( http://http://vzt.no/index.php/vzt_eng/referanser )
VZT Extensions ( http://vzt.no/index.php/vzt_eng/extensions )
www.MediaBase.no ( http://www.MediaBase.no )
|
|
Juri T
|
Thursday 18 November 2004 11:00:51 am
I have the same problem... :(
Page opening aboute 20-40 seconds..
I have not very fast machine, but It is really impossible, because other php scripts, working well..
|
|
Felix Laate
|
Thursday 18 November 2004 12:03:43 pm
Happend to me too. After creating some 10-15 folders my system (news-siteaccess not admin) simply times out. Errormessage: Fatal error: eZ publish did not finish its request The system runs 3.5.0beta1 felix
Publlic Relations Manager
Greater Stavanger
www.greaterstavanger.com
|
|
Siw Helen Thorslund
|
Thursday 18 November 2004 12:14:17 pm
This happened to me on a ezpublish-3.4.4 installation... Anyone who solved this problem?
www.VZT.no ( http://www.VZT.no )
VZT References ( http://http://vzt.no/index.php/vzt_eng/referanser )
VZT Extensions ( http://vzt.no/index.php/vzt_eng/extensions )
www.MediaBase.no ( http://www.MediaBase.no )
|
|
Łukasz Serwatka
|
Thursday 18 November 2004 12:22:49 pm
Could you give us a more detailed answer? What OS, PHP version (CGI or mod_php), database engine, hardware (processor speed, RAM) do you use? Did you check debug output? What are your timings? Did you chceck permissions to var directory?
Personal website -> http://serwatka.net
Blog (about eZ Publish) -> http://serwatka.net/blog
|
|
Juri T
|
Thursday 18 November 2004 1:37:19 pm
For example, I have next confiruration:
http://www.smji.ee/qwer/inf.php
(php is not version 4.3.2, where hard to find working versions to compile on freebsd with php with bg)
Main page is opening tooooo slowly..
I can see, that httpd takes 60%-90% of processor and increasing swap size up to 120mb !!.
On last step (real creating database and other configuration) I have timeout after 600sek.
Server configuration:
Cyrix 233mhz, 48mb, 170mb swap disk.
Installed eZ 3.4.4 version.
What other information I can give to help to developers?
|
|
Juri T
|
Thursday 18 November 2004 1:39:48 pm
Also, I tryed to run with 96mb memory.. no changes :(
|
|
Siw Helen Thorslund
|
Thursday 18 November 2004 1:58:27 pm
I have several other installations of eZ on this server, with the exact same setup.
The server is super.
I have had technicians chencking it.
It's only this installation who started beeing slow.
Never happened before...
www.VZT.no ( http://www.VZT.no )
VZT References ( http://http://vzt.no/index.php/vzt_eng/referanser )
VZT Extensions ( http://vzt.no/index.php/vzt_eng/extensions )
www.MediaBase.no ( http://www.MediaBase.no )
|
|
Bruce Morrison
|
Thursday 18 November 2004 2:00:46 pm
The very first thing to do when there is a problem is turn on debugging in settings/override/site.ini.append.php [DebugSettings]
DebugOutput=enabled
This should give you any errors that are occuring as well as a timing table. The timing table will allow you to pinpoint the areas where the time is being taking up in the page generation. If you cannot work out what is going on, post the debug output here and I'll have a look.
Cheers
Bruce
My Blog: http://www.stuffandcontent.com/
Follow me on twitter: http://twitter.com/brucemorrison
Consolidated eZ Publish Feed : http://friendfeed.com/rooms/ez-publish
|
|
Siw Helen Thorslund
|
Thursday 18 November 2004 2:32:07 pm
I have these settings:
[TemplateSettings]
Debug=enabled
[ContentSettings]
ViewCaching=enabled
TranslationList=
[DebugSettings]
DebugOutput=enabled
ScriptDebugOutput=enabled
DebugByIP=enabled
DebugIPList[]=
Debug=inline
DebugRedirection=disabled
But it just want to write out the TemplateSettings debug..... Is something wrong with that setup? Yes, I have emptied the cache...
www.VZT.no ( http://www.VZT.no )
VZT References ( http://http://vzt.no/index.php/vzt_eng/referanser )
VZT Extensions ( http://vzt.no/index.php/vzt_eng/extensions )
www.MediaBase.no ( http://www.MediaBase.no )
|
|
Siw Helen Thorslund
|
Thursday 18 November 2004 2:39:54 pm
YES!!! I found the error! I was stupid enough to put an {menu name=TopMenu} inside flat_top.tpl that messed it all up..hehe Thanx for your willingness to help.. =)
www.VZT.no ( http://www.VZT.no )
VZT References ( http://http://vzt.no/index.php/vzt_eng/referanser )
VZT Extensions ( http://vzt.no/index.php/vzt_eng/extensions )
www.MediaBase.no ( http://www.MediaBase.no )
|
|
Juri T
|
Thursday 18 November 2004 2:49:09 pm
He.. you are good man, but what aboute us? I have made no changes :))
What I have to check? :)
|
|
Łukasz Serwatka
|
Thursday 18 November 2004 11:25:37 pm
Hi Juri
This is from eZ publish requirements
http://www.ez.no/ez_publish/info/requirements
Required hardware
There are no built-in requirements. The hardware needed to run an eZ publish site
depends on several factors, such as the average number of users, the size of the
templates (including graphics), and how caching is used.
(See the performance notes below.)
The installation requires about 50 MB on your harddisc.
We do recommend some minimum values; at least 500 MHz CPU and 250 MB of RAM.
I think that your hardware configuration is not enough.
Personal website -> http://serwatka.net
Blog (about eZ Publish) -> http://serwatka.net/blog
|
|
Juri T
|
Friday 19 November 2004 2:17:57 pm
Could anybody tell me, how to change 600 sek (timeout) to 1000 for example. PHP ini file checked, Apache conf checked, eZ site.ini checked..
|
|
Juri T
|
Friday 19 November 2004 2:18:43 pm
Could anybody tell me, how to change 600 sek (timeout) to 1000 for example. PHP ini file checked, Apache conf checked, eZ site.ini checked..
|
|
Frederik Holljen
|
Friday 19 November 2004 11:03:55 pm
There is a setting in php.ini
|
|
Ekkehard Dörre
|
Saturday 20 November 2004 3:11:01 am
in php.ini ( the ??? are place holders)
;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;
max_execution_time = ??? ; Maximum execution time of each script, in seconds
max_input_time = ??? ; Maximum amount of time each script may spend parsing request data
memory_limit = ??M ; Maximum amount of memory a script may consume (8MB)
Greetings, ekke
http://www.coolscreen.de - Over 40 years of certified eZ Publish know-how: http://www.cjw-network.com
CJW Newsletter: http://projects.ez.no/cjw_newsletter - http://cjw-network.com/en/ez-publ...w-newsletter-multi-channel-marketing
|
